Switches & Outlets in Madison, WI
Loose outlets, worn switches, and GFCI upgrades replaced cleanly — devices that sit snug in the box and work the way they should.
Outlets and switches are the parts of a home you touch every day, and they wear out in ways you can feel — a receptacle that no longer holds a plug, a switch that's gone stiff or crackles, or a faceplate that's cracked and yellowed. We replace those worn devices so they sit snug in the box and work cleanly, and we install GFCI outlets near sinks where older Madison-area homes often still have ungrounded receptacles.
When a device is discolored or warm to the touch, it's worth replacing promptly rather than waiting. We work through what's in the wall — including plaster and lath in older homes — and make sure the new device is connected and seated the way it should be.
What Switch & Outlet Work Covers
Outlet Replacement
Replace loose, worn, or discolored receptacles so they hold plugs snugly.
Switch Replacement
Swap stiff, noisy, or broken switches for clean, working devices.
GFCI Installation
Add ground-fault protection near sinks and in wet areas of older homes.
Dimmer & Smart Switches
Install dimmers and smart switches when the box and wiring support them.
Box & Faceplate Repair
Replace cracked faceplates and reseated boxes so the device sits flush to the wall.
Plaster-Wall Care
Work around plaster and lath so older walls stay intact around the new device.
How a Switch or Outlet Replacement Goes
Send a photo of the device
A picture of the outlet or switch and the wall around it, with a note on the problem, is usually enough for an initial estimate by phone or email.
Identify the device and the box
We confirm what's being replaced, whether a GFCI or dimmer is wanted, and what's in the wall before we start.
Remove the old device safely
The worn outlet or switch comes out so we can inspect the connections and the box behind it.
Install the new device
The new receptacle or switch is connected and seated snug in the box, with a clean faceplate.
Test and clean up
We confirm the device works and sits flush, then leave the wall and floor clean.
What Homeowners Should Know About Switches & Outlets
Warm or discolored means replace. An outlet that's discolored, warm, or has stopped holding a plug is past its useful life and worth swapping promptly.
Older homes often lack GFCI. Many near-east-side Madison homes still have ungrounded outlets near sinks. Adding a GFCI is a sensible safety upgrade in kitchens, baths, and laundry areas.
Dimmers need the right box. A dimmer or smart switch needs a box deep enough for the device and the wiring. We check the box first and let you know what's involved.
First Time Clients Discount
$50 off with 4 hours of service, or $100 off with 8 hours of service.
Ask about our senior discounts for Dane County homeowners.
Offer valid for first time clients only. One discount per client.
Frequently Asked Questions
Can you replace an outlet that's loose or sparking?+
Yes. A loose, discolored, or sparking outlet should be addressed promptly. We replace the worn device and check the connections so the new one sits snug and safe in the box.
Can you add an outlet where there isn't one?+
We can install an outlet where a suitable box and wiring path are available. We'll talk through what's in the wall and how the new device gets connected before any work starts.
Do you replace light switches?+
Yes. We replace worn, stiff, or noisy switches, and we can swap a standard switch for a dimmer or a smart switch when the box and wiring support it.
Can you install a GFCI outlet in a kitchen or bath?+
Yes. Installing a GFCI near a sink is a common safety upgrade, especially in older Madison homes that still have ungrounded outlets in wet areas.
How is switch and outlet work estimated?+
A photo of the device and the wall around it, plus a note on what's wrong or what you'd like added, is usually enough for an initial estimate by phone or email.
Serving Dane County Homeowners
Residential service across Madison and the surrounding communities. Find your town:
View all 18 Dane County communitiesWhere We Work in Dane County
We're a residential-only service-area business based in Madison, WI. Pan and zoom the map to explore the communities we serve across Dane County.
Interactive Service Area Map
Loading the map of Madison, WI — Handyman Home Services service area.
Serving Madison & Dane County, WIGet Your Estimate
Send a few details and photos - most jobs can be estimated without a visit.