Powder Coating & Metal Polishing in Madison, WI
Durable powder coat finishes and bright metal polishing for railings, furniture, and hardware — with honest size limits so you know what fits.
Metal finishes take a beating in Wisconsin — outdoor railings, furniture frames, and hardware face road salt, snowmelt, and months of damp. Powder coating lays down a baked-on finish that holds up to weather far longer than paint, and metal polishing restores the shine to tarnished or lightly rusted pieces. We handle railings, furniture, hardware, and small metal pieces, and we're upfront about the size limits of our setup so you know what fits before we start.
Surface prep is the part that decides whether a finish lasts. We strip the old paint and rust and prep the bare metal before any coating goes on, because a powder coat is only as durable as the surface beneath it. For polishing, we clean and buff the metal to a smooth, bright finish — and if a piece is too deeply pitted for polishing alone, we'll say so rather than promise a result it can't deliver.
What Metal Finishing Work Covers
Powder Coating
Apply a baked-on finish to metal that fits within our size limits.
Metal Polishing
Clean and buff tarnished or lightly rusted metal to a bright finish.
Surface Prep
Strip old paint and rust and prep bare metal so the finish bonds and lasts.
Railings & Hardware
Refinish indoor and outdoor railings, brackets, and hardware pieces.
Furniture Frames
Coat or polish metal furniture frames for a durable, clean finish.
Honest Size Limits
Tell you up front when a piece is too large for our setup.
How a Powder Coat or Polishing Job Comes Together
Send a photo and dimensions
A picture of the item and its approximate size, with a note on the finish you'd like, is usually enough for an initial estimate by phone or email — and confirms it fits our setup.
Assess the metal's condition
We check for deep pitting, heavy rust, or existing coatings so we can tell you what the finish will actually look like.
Strip and prep the surface
Old paint and rust come off and the bare metal is prepped — the step that decides whether the finish lasts.
Coat or polish
The powder coat is applied and baked on, or the metal is cleaned and buffed to a bright finish.
Inspect and return
We check the finish for coverage and adhesion, then return or reinstall the piece clean.
What to Know About Powder Coating & Polishing
Prep makes or breaks the finish. A powder coat over old paint or rust fails fast. Stripping to bare metal and prepping the surface is what makes the new finish durable.
Polishing can't fix deep pits. Polishing restores shine to tarnished or lightly rusted metal, but deeply pitted steel needs more than a buff. We'll tell you honestly when a piece is past polishing.
Size limits are real. Our setup has practical size limits, so a very large item may not fit. Send dimensions first and we'll tell you up front rather than guessing.
First Time Clients Discount
$50 off with 4 hours of service, or $100 off with 8 hours of service.
Ask about our senior discounts for Dane County homeowners.
Offer valid for first time clients only. One discount per client.
Frequently Asked Questions
What can you powder coat?+
Metal items like railings, furniture frames, brackets, and small hardware that fit within our size limits. If a piece is too large for our setup, we'll tell you up front rather than guess.
Can you polish rusted or tarnished metal?+
Yes. We clean and polish tarnished or lightly rusted metal — railings, hardware, and furniture pieces — bringing back a smooth, bright finish. Deeply pitted metal may need more than polishing, and we'll let you know.
Does powder coating hold up outdoors?+
A properly prepped and cured powder coat is a durable finish that stands up to weather far better than paint, which is why it's common on outdoor railings and furniture exposed to Wisconsin seasons.
Do I need to bring the item to you?+
For smaller pieces we can often pick up and return them; for railings and larger furniture we'll talk through the logistics. Send a photo and the rough dimensions and we'll work it out.
How is powder coating and metal polishing estimated?+
A photo of the item and its approximate dimensions, plus a note on the finish you'd like, is usually enough for an initial estimate by phone or email.
Serving Dane County Homeowners
Residential service across Madison and the surrounding communities. Find your town:
View all 18 Dane County communitiesWhere We Work in Dane County
We're a residential-only service-area business based in Madison, WI. Pan and zoom the map to explore the communities we serve across Dane County.
Interactive Service Area Map
Loading the map of Madison, WI — Handyman Home Services service area.
Serving Madison & Dane County, WIGet Your Estimate
Send a few details and photos - most jobs can be estimated without a visit.