Light Fixtures in Madison, WI
Indoor and outdoor fixtures installed and replaced — hung level, wired cleanly, and mounted to the box that's actually overhead.
A new light fixture changes a room fast, but only when it's hung securely and connected cleanly. The catch is almost always the box overhead — many older Madison homes have ceiling boxes that were never meant to hold a heavier fixture or a ceiling fan. We look at what's actually there before we hang anything, and we talk through what's needed so the mount is solid rather than a wobble waiting to happen.
We handle indoor and outdoor fixtures alike: chandeliers, flush mounts, pendant lights, porch lights, and garage lanterns. For exterior fixtures we check that the piece is rated for outdoor use and mounted to keep water away from the box, since Wisconsin winters and spring thaws are hard on anything exposed.
What Fixture Work Includes
Indoor Fixture Installation
Hang flush mounts, pendants, and chandeliers level and secure to a rated box.
Outdoor Fixture Installation
Mount porch lights and garage lanterns rated for outdoor, weather-shedding use.
Fixture Replacement
Take down the old fixture safely and swap in the new one without a messy retrofit.
Box & Mount Check
Confirm the ceiling box is rated for the fixture's weight before we hang it.
Plaster-Ceiling Care
Work carefully around plaster and lath so older ceilings stay intact.
Fan-Ready Upgrades
Upgrade a standard box to a fan-rated mount when you're swapping a light for a fan.
From Box to Bulb: The Installation Steps
Send a photo of the fixture and the spot
A picture of the new fixture and the ceiling or wall where it goes, with a note on the surface type, is usually enough for an initial estimate by phone or email.
Check the box and the surface
We confirm the existing box is rated for the fixture's weight and talk through any plaster or lath considerations before starting.
Protect the floor and furnishings
Drop cloths go down and the area is cleared so dust and debris stay contained while we work overhead.
Remove the old, hang the new
The old fixture comes down safely, the box is upgraded if needed, and the new fixture is mounted level and connected cleanly.
Test and tidy up
We confirm the fixture lights and sits level, check the outdoor seal, and leave the space clean.
Things to Know Before Swapping a Fixture
The box sets the limit. A heavier chandelier or a ceiling fan needs a fan-rated box, not the lightweight one that held a flush mount. We check first and upgrade the mount when the fixture calls for it.
Outdoor fixtures take weather seriously. A porch light that isn't rated for outdoor use or is mounted to trap water fails fast. We use the right fixture and mount it to shed water away from the box.
Plaster ceilings need a light touch. Removing an old fixture from plaster and lath can crumble the surrounding area. We work carefully and patch minor damage so the ceiling reads clean around the new fixture.
First Time Clients Discount
$50 off with 4 hours of service, or $100 off with 8 hours of service.
Ask about our senior discounts for Dane County homeowners.
Offer valid for first time clients only. One discount per client.
Frequently Asked Questions
Can you hang a light fixture where there isn't one yet?+
We can install a fixture where a suitable box is present or can be added. We'll talk through what's above the ceiling or behind the wall before we start, especially in older Madison homes with plaster.
Do you replace a chandelier or heavy fixture?+
Yes. We confirm the box is rated for the weight, take down the old fixture safely, and hang the new one level and secure. For very heavy pieces we'll discuss the mounting support first.
Can you swap a fixture for a ceiling fan?+
Often, yes — as long as the box is fan-rated or can be upgraded to one. We'll let you know what's overhead before committing to the swap.
Do you install outdoor light fixtures?+
Yes. We install and replace exterior fixtures like porch lights and garage lanterns, and we check that the fixture is rated for outdoor use and mounted to shed water away from the box.
How is light fixture work estimated?+
A photo of the existing fixture or the spot where you'd like one, plus a note on the ceiling or wall type, is usually enough for an initial estimate by phone or email.
Serving Dane County Homeowners
Residential service across Madison and the surrounding communities. Find your town:
View all 18 Dane County communitiesWhere We Work in Dane County
We're a residential-only service-area business based in Madison, WI. Pan and zoom the map to explore the communities we serve across Dane County.
Interactive Service Area Map
Loading the map of Madison, WI — Handyman Home Services service area.
Serving Madison & Dane County, WIGet Your Estimate
Send a few details and photos - most jobs can be estimated without a visit.